If you have questions or requests, contact us at: 214-630-8657
or toll free at:
1-866-631-2600
jim@sunbeltmaterials.com
| Pathway Polymers | ||
 |
||
|
||
|
||
|
||
 |
||
| |
||
Mold Release Agents
Synlube 531
Synlube 531 is a non-silicone release agent specifically formulated for use with Synair's flexible urethane molding system Por-A-Mold and Synair's urethane casting system Por-A-Kast. It can also be used with other polyurethanes, epoxies, polyester resins, and silicone rubbers.Synlube 1000
Synlube 1000 is a silicone-based release agent formulated for the release of both low and high temperature cured urethanes from metal and plastic molds. It can also be used with epoxies and Viton .Physical Properties of Mold Release Agents (Bulk)
Property
Appearance
Beige
Colorless
Viscosity, CPS
<3 @ 77°F (25°C)
<3 @ 75°F (24° C)
Specific Gravity
0.85 @ 77°F (25°C)
0.70 @ 75°F (24° C)
Weight Per Gallon
7 lb. (3.18 kg)
5.80 lb. (2.63 kg)
Flash Point
45° F (7° C) (C.O.C.)
>0° F (-18° C)
Release Type
Non-silicone
Silicone
Solvent Type
Toluene
Hexane
For Material Data Safty Sheets (MSDS) please contact us.
Viton is a registered trademark of DuPont Dow Elastomers.
The conditions for your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis at least must include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by Pathway Polymers. All information is given without warranty or guarantee. It is expressly understood and agreed that customer assumes and hereby expressly releases Pathway Polymers from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind Pathway Polymers. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
Updated March 5, 1999.
