If you have questions or requests, contact us at: 214-630-8657
or toll free at:
1-866-631-2600
jim@sunbeltmaterials.com
| Pathway Polomers | ||
 |
||
 |
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
| |
||
Por-A-Mold Series 2000
Introduction
Por-A-Mold Series 2000 is our exciting new line of polyurethane molding systems. These high-quality products contain no pigments or fillers. This means that Series 2000 molding systems are easy to work with and the resulting molds are extremely durable.Applications and Uses
Por-A-Mold gives true detailed reproductions of original masters in Pathway Polymers™ own urethane casting system Por-A-Kast, wax, epoxy, resin, Plaster of Paris, gypsum, and concrete materials. Synlube 531 release agent is recommended for use with Por-A-Mold and Por-A-Kast.Physical Properties ofPor-A-Mold Products
The following Por-A-Mold products cure at room temperature, 70-75º F (21- 24º C), in 24 hours.
Property
Shore A Hardness
24±2
28±2
44±2
58±2
70±2
Specific Gravity (Cured Elastomer)
1.007
1.054
1.026
1.0279
1.06
Ultimate Tensile, PSI
375
634
752
1600
1468
Elongation, %
>1200
900
725
900
900
Tear, Die C, PLI
104
88
159
200
264
Tear, Split, PLI
23
12.8
23
33
59
Rebound, Bashore, %
67
68
63
62
43
Mixed Viscosity @ 25°C, cps
1364
1300
1770
1400
2650
Mix Ratio by Weight Curative:Prepolymer
0.98:1
1:1
0.95:1
1:1.08
0.96:1
Mix Ratio by Volume Curative:Prepolymer
1:1
1:1
1:1
1:1
1:1
Resin Shelf Life (Months)
6
6
6
6
6
Pot Life* (Minutes)
30
20
15
15“20
10
Gel Time* (Minutes)
39-40
20-30
21-22
20-25
15
*Pot life, gel time, and cure time will vary with mass and the temperature of the components.
For Material Data Safty Sheets (MSDS) please contact us.
Por-A-Mold, Por-A-Kast, and Synlube are registered trademarks of Pathway Polymers.
The conditions for your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis at least must include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Pathway Polymers has not necessarily done such testing. All information is given without warranty or guarantee. It is expressly understood and agreed that customer assumes and hereby expressly releases Pathway Polymers from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind Pathway Polymers. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
May 9, 2000
