Distributor of Rhodia Silicones and Synair polyurethane products
If
you have questions or requests, contact us at: 214-630-8657
or
toll free at:
1-866-631-2600
jim@sunbeltmaterials.com
| Rhodia Silicones | ||
 |
||
|
Addition Cures | |
 |
V-240 | |
|
V-243 | |
|
V-249 | |
|
V-252 | |
|
V-252 Diluent | |
|
V-330 | |
|
V-340/CA-35 | |
|
||
|
V-340/CA-55 | |
|
V-341 | |
|
V-360 | |
|
V-3038 | |
|
V-3040 | |
|
RTV-1556 | |
|
RTV-1597 | |
RHODORSIL
V-360
TECHNICAL DATA SHEET--April 2001
V-360 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a 60 durometer rubber.
TYPICAL APPLICATIONS
· Conventional production and prototype molds
· Finished rubber parts
· Stereolithography (SLA) molds
TYPICAL PROPERTIES - AS SUPPLIED Part A - Base Component Color Beige Consistency Pourable Viscosity, cP. (mPa.s) 110,000 Part B Curing Agent Color Violet Viscosity, cP. (mPa.s) 5,000
TYPICAL CATALYZED PROPERTIES Mixed at 24°C (75°F) and 50% R.H. Mix Ratio,A:B(Parts by weight) 10:1 Viscosity, cP. (mPa.s) 80,000 Pot Life, min. (1) 90 Coverage, in³/lb. (cc/kg) 22.5 (769)
TYPICAL PROPERTIES OF CURED RUBBER Cured 16 hours at 25°C (77°F) plus 30 minutes at 150°C (300°F) Color Violet Specific Gravity 1.23 Hardness (Shore A) ASTM D2240 64 Tensile Strength, psi (N/mm^2) ASTM D412 980 (6.7) Elongation (%) ASTM D412 135 Tear Resistance, ppi (N/mm) ASTM D624 70 (12.3) Die B Temperature Range °C (°F) -54 to 204 (-65 to 400) NOTE: V-360 cure time may be accelerated by oven curing at 49-65°C (120-150°F) for 1-2 hours. HEAT CURING WILL EFFECT PHYSICAL PROPERTIES
SHELF LIFE
Six (6) months from date of shipment when stored at 24°C (75°F) in original unopened containers.
(1) Time at which material gels.
